| ◆ FEATURES： |
| 1．Covering all functions of TA series |
| 2．With functions of displaying, analogue, alarm and adjust control. Selected by software |
| 3．Universal input: A, mA, V, mV, Rt, TC, RTD, or other special input signal such as AC voltage/frequency. |
| 4．Auxiliary power DC 24V/3. |
| 5．Can be with RS485 communication interface, MODBUS or RTU protocol for option | |
 |
| Input type |
Thermocouple |
K, E, J, T, B, S, R |
| Thermo resistance |
Pt100, Cu50, Cu100 |
| Current |
0-10mA, 4-20mA |
| Voltage |
1-5V, 0-10V, 0-75mV |
| Others |
AA, AV, DA, DV or special input |
| Control typeIt can be freely converted withControl type. |
On/off control |
proportion scan 0%-3600%integral time 0-3600Sdifferential time 0-3600S |
| PI control |
| PID control |
| Control output |
R: |
Relay: AC 250V/3A or DC 30V/3A |
| S: |
SSR / logic control output |
| T: |
SCR control output |
| Measuring accuracy |
±0.5%F.S±1digit |
| A/D conversion |
Dual integral |
| Sample time |
<0.5S |
| Power supply |
85-260VAC/DC(TH4), 220/110VAC(TA6,7,8,9,10,11), or 24VDC |
| Operating condition |
0-50℃ 45-85%RH |
| Display |
Two line 4 digit |
| Withstand voltage strength |
AC 1500V 1min (Between power terminal and case) |
| Power consumption |
<5VA |
| Insulation resistance |
DC 500V>50MΩ（Between power terminal and case） |
 |
| Input Signals：1 input Default：TC/RTD/4-20mA/0-10V |
| 2 input 0：TC/RTD 1：0-10V 2：4-20mA 3：1-5V 4：0-10V 5：0-75mV |
| 6：AV/AA,/DA/DV 7：-30～30mV 8：Pulse 0-5KHz |
| Other：Special input signal |
| Auxiliary Power: Default: Without Auxiliary power A: 12V DC B: 24V DC |
| Communication: Default: Without communication 2: RS232 4: RS485 |
| OUT2/AL3：N：Non R：Relay control output S：SSR/Logic control output |
| AL1：N：No AL1 R：Relay control output S：SSR/Logic control output |
| T：SCR control output |
| AL2 (Cooling)：N：No AL2 R：Relay control output |
| S：SSR/Logic control output T：SCR control output I：4-20mA or 0-10V |
| G：Pulse output E：Others |
| Main output(Heating)：R：Relay control output S：SSR/Logic control output |
| T：SCR control output I：4-20mA or 0-10V G：Pulse output E：Others |
| Control：Default：Normal PID V：Proportion control F：3 phase shift control |
| R：Remote setting control P：Programmable curve control |
| G：3 phase logic control K：Simple phase shift control |
| Power：Default：90-260V AC/DC E：24VDC |
| Size：4：48x48mm 6：48x96mm 7：72x72mm 8：96x48mm 9：96x96mm |
| 10：80x160mm 11：160x80mm |
| TH Series of Digital Adjustor | |
| TH9E-IRRS4B02 means the controller is 96x96mm in size, Power supply 24VDC, Main heating output 4-20mA, Cooling output is relay, 2 alarms, with RS485, with auxiliary power 24VDC, 2 inputs (One is TC/RTD input, the second input is 4-20mA). | |
